2022 Ram 3500

ELECTRICAL SYSTEM:WIRING:RELAYS/SOLENOIDS

Chrysler (FCA US, LLC) is recalling certain 2021-2022 Ram 3500, 2500 pickup trucks, and Ram 3500, 4500, and 5500 cab chassis vehicles equipped with Cummins 6.7L Turbo Diesel engines. An electrical short in the relay may cause a vehicle fire with the ignition on or off.

Remedy: Owners are advised to park these vehicles outside of buildings or structures, and not near other vehicles, until the vehicle has been remedied. Dealers will inspect and, if needed, replace the Solid State Intake Heater Grid Relay ("Relay"); if FCA US Recall ID Y08 (NHTSA Recall ID 21V-163) is open, then insulating material will be applied to the Relay after inspection. Owner notification letters were mailed November 10, 2021. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is Y76. This recall has been superseded by 23V060.

AIR BAGS:SIDE/WINDOW:CURTAIN

Chrysler (FCA US, LLC) is recalling certain 2021-2022 Ram 2500, Ram 3500, and 2021 Ram 1500 Classic pickup trucks. The side air bag inflatable curtain (SABIC) assemblies may have been manufactured with the incorrect amount of compressed gas, which can result in an improper air bag deployment.

Remedy: Dealers will replace the SABIC assemblies, free of charge. Owner notification letters were mailed January 17, 2022. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is Y99.

SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE

Chrysler (FCA US, LLC) is recalling certain 2019-2022 Ram 2500 and 2021-2022 Dodge Durango vehicles, and 2019-2022 3500 cab chassis with GVWR less than 10,000 lbs. The ABS control module software may prevent the electronic stability control (ESC) malfunction indicator light from illuminating during certain conditions. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 126, "Electronic Stability Control Systems."

Remedy: Dealers will update the ABS control module software, free of charge. Owner notification letters were mailed March 29, 2022. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is Z20.

BACK OVER PREVENTION:DISPLAY FUNCTION

Chrysler (FCA US, LLC) is recalling certain 2022 Ram 1500, 2500 pickup trucks, and 3500 Cab Chassis vehicles with GVWR less than 10,000 lbs. The radio software may prevent the rearview image from displaying. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."

Remedy: Dealers will reprogram the radio software, free of charge. Owner notification letters were mailed July 5, 2022. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLS's number for this recall is Z47.

ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM)

Chrysler (FCA US, LLC) is recalling certain 2022 Ram 3500, 3500 Cab Chassis, Ram 2500, and 4500 and 5500 Cab Chassis vehicles equipped with Cummins 6.7L turbo diesel engines. The engine control module (ECM) may have been built with a misaligned capacitor that can short-circuit, resulting in an internal loss of communication.

Remedy: Dealers will replace the ECM, free of charge. Owner notification letters were mailed October 20, 2022. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is Z87.

POWER TRAIN:AUTOMATIC TRANSMISSION

FCA US, LLC (Chrysler) is recalling certain 2020-2023 Ram 2500 and 2020-2022 Ram 3500 vehicles. A build-up of pressure and heat inside the transmission may result in a transmission fluid leak from the dipstick tube.

Remedy: Dealers will replace the transmission dipstick and transmission vent assembly, free of charge. Owner notification letters were mailed December 29, 2022. Owners may contact FCA US, LLC customer service at 1-800-853-1403. Chrysler's number for this recall is ZA3.

STRUCTURE:BODY:TAILGATE:HINGE AND ATTACHMENTS

Chrysler (FCA US, LLC) is recalling certain 2019-2022 Ram 1500, 2500, and 3500 pickup trucks. The tailgate may not latch properly due to misaligned tailgate strikers, which could result in the tailgate opening while driving.

Remedy: Dealers will inspect the tailgate striker alignment to the box latch and adjust, if necessary, free of charge. Owner notification letters were mailed December 22, 2022. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is ZB8.

ELECTRICAL SYSTEM:WIRING:RELAYS/SOLENOIDS

Chrysler (FCA US, LLC) is recalling certain 2021-2023 Ram 2500, 3500, 3500 Cab Chassis, and 4500, 5500 Cab Chassis vehicles equipped with a Cummins 6.7L Turbo Diesel engine. An electrical short may occur in the heater grid relay with the ignition on or off.

Remedy: Owners are advised to park outside and away from structures until the recall repair is complete. Dealers will replace the relay, free of charge. This will be a Phased campaign. Phase 1 will include 2023 model year vehicles. FCA US will notify dealers on or about 3/23/2023 and begin notifying owners on or about 4/5/2023. Phase 2 will include 2022 model year vehicles and Phase 3 will include 2021 model year vehicles. FCA US will notify dealers and owners on or about 4/27/2023 for Phase 2 and 5/11/2023 for Phase 3. Interim owner notification letters informing owners of the safety risk were mailed March 28, 2023. Owner notification letters are expected to be mailed April 5, 2023. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 13A. This recall is an expansion of and supersedes recall number 21V-798.

BACK OVER PREVENTION:DISPLAY FUNCTION

Chrysler (FCA US, LLC) is recalling certain 2022-2023 Ram 1500, Ram 3500 Cab Chassis with GVWR less than 10,000 lbs., and 2022-2024 Ram 2500 vehicles. The radio software may prevent the rearview image from displaying. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."

Remedy: Dealers will update the radio software, free of charge. Owner notification letters were mailed October 24, 2023. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 97A.

ELECTRONIC STABILITY CONTROL (ESC):CONTROL MODULE

Chrysler (FCA US, LLC) is recalling certain 2022 Dodge Durango and Ram 2500 and 3500 vehicles. Due to a software malfunction, the ABS control module may disable the electronic stability control system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 126, "Electronic Stability Control Systems."

Remedy: Dealers will update the ABS control module software, free of charge. Owner notification letters were mailed beginning July 11, 2024. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 55B.

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Chrysler (FCA US, LLC) is recalling certain 2021-2022 Dodge Durango, 2021-2023 Chrysler Pacifica, Jeep Grand Cherokee L, 2022 Ram 1500, 2500, 3500, Chrysler Voyager, 2022-2023 Jeep Compass, Grand Cherokee, Wagoneer, Grand Wagoneer, and Ram Promaster vehicles. The radio software may prevent the rearview image from displaying. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."

Remedy: Dealers will update the radio software or the software will be OTA, "Over-The-Air," free of charge. Owner notification letters were mailed beginning July 9, 2024. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's numbers for this recall are 66B and 79B.

AIR BAGS:FRONTAL

Chrysler (FCA US, LLC) is recalling certain 2021-2022 Ram 1500, Ram 2500, Ram 3500, Ram 4500, and Ram 5500 vehicles. The steering column control module may cause the driver's side air bag not to deploy as intended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."

Remedy: Dealers will replace the steering column control module, free of charge. Owner notification letters were mailed beginning December 11, 2025. Owners may contact Chrysler customer service at 800-853-1403. Chrysler's number for this recall is 14C. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov beginning November 13, 2025.

While travelling in Southern California, I came to a stop to enter I8 on ramp. When I tried to start down the on ramp the truck didn’t want to move and a check engine light came on. The truck went into limp mode so would travel slowly along. I called Mango Auto who could diagnose it the following morning. I did not make it to the shop before the transmission failed completely and the truck wouldn’t move leaving me in traffic in a dangerous spot. Eventually I was towed to the shop in Yuma AZ. They diagnosed it as a complete transmission failure requiring a $10,000 replacement. FCA has issued an extended warranty, but my mileage is 16700 miles over. FCA has a technical bulletin on the issue with the Austin transmission, but has not but should have issued a recall. This failure To issue a recall left me stuck in a dangerous situation and could have resulted in a crash.

The contact owns a 2022 Ram 3500. The contact stated that while driving at an undisclosed speed, the engine made abnormal knocking and ticking sounds. The knocking and ticking sounds became louder while accelerating. There was no warning light illuminated. The vehicle was taken to an independent mechanic, who determined that the piston had ingested the grid heater nut. The mechanic replaced the piston, cylinder head assembly, gaskets, rod, gasket intake, Hamilton flat tappet conversion kit, and XDP grid heater. The manufacturer was made aware of the failure. The failure mileage was 88,745.

In a 55mph car accident where the vehicle has been totaled and none of the airbags deployed

Vehicle lost drive via the transmission when it disengaged unexpectedly. Known issue that Stellantis classifies under "Customer Satisfaction Notice" instead of a recall. There are many examples of recalls issued by other manufacturers related to loss of drive via the transmission, so why is this being treated as a notice of inconvenience versus a safety issue? Issue is being addressed via a Technical Service Bulletin where units that fail are repaired after the fact versus proactively inspected and replaced.

The center infotainment stack screen refused to power up when starting the vehicle. The radio and hvac functions worked, but the screen would not turn on preventing the backup camera from functioning. Restarting the system twice and restarting the vehicle failed to get the system to function. Upon restart several hours later all systems appear to function normally. A video is available of the failure.

### **NHTSA Complaint Statement of Facts** **RE: Recall Y43 (NHTSA Campaign 22V-406) – Failure of Recall Remedy** **Summary:** The manufacturer (Stellantis/FCA) is refusing to provide a complete and effective remedy for **Recall Y43**. My 2022 Ram 3500 was manufactured without the **Particulate Matter (PM) Sensor**, a defect officially acknowledged in Recall Y43. This factory omission has caused terminal blockage of the **Diesel Particulate Filter (DPF)**—a specific consequential failure documented in the manufacturer's own recall filing. **Technical Argument:** 1. **Causal Link:** The official Y43 recall notice states: *"The PM sensor... may not have been installed... This could increase vehicle emissions and **block the diesel particulate filter**."* My vehicle currently suffers from the exact "blocked DPF" condition described. 2. **Ineffective Remedy:** Stellantis has offered to install the missing sensor (the Y43 part) but refuses to replace the ruined DPF. Installing a sensor on a filter already terminally blocked due to the sensor's absence is not an "effective remedy" under the **National Traffic and Motor Vehicle Safety Act**. 3. **Warranty Admission:** Per **TSB 09-014-22 (X97)**, the manufacturer has issued a 1-year unlimited mile warranty extension for the DPF specifically for vehicles affected by Y43. Refusing to replace a filter that failed *before* the recall was performed is an attempt to circumvent this warranty obligation. **Safety Risk:** The vehicle is currently in "Limp Mode" with a "Filter Full - Power Reduced" message. This creates an unreasonable safety risk of **stalling or loss of power** while operating on public highways, a condition explicitly mentioned in the Y43 safety report as increasing the risk of an accident. I am seeking an order for the manufacturer to replace the DPF as part of the Y43 recall remedy at no cost to the consumer. The manufacturer’s Case Manager has denied the claim and refused further communication

Valvetrain No Yes Yes No

I own this truck and have had issues with the exhaust regeneration process for about 6 months. I have taken it to the dealer 3 times and they have done diagnostics and replaced the diesel particulate filter, but the issue continues to happen. They have now told me that the system is not reparable and they don't have support from RAM manufacturer to troubleshoot and repair this issue. They have multiple customers with the same issue with the diesel exhaust system not operating properly, hampering the engine performance, damaging the engine and exhaust system, polluting from the exhaust discharge. This is a widely known issue with the 2022 Ram 3500 from other owners, yet RAM refuses to properly address the issue. They advertise their trucks with certain horsepower and output specs, which aren't accurate due to their faulty exhaust systems. Consumers are now completely removing the factoring exhaust systems because they damage the engines and cost thousands of dollars to attempt to repair, which many times never work. This needs to be addressed with RAM and recalls put in place to address the failures with their exhaust systems. My truck has 28,000 miles on it, 3 years old, and is not operable. The dealer has had 3 attempts to repair this and is now turning me away. Please help! Thank you

The contact owns a 2022 Ram 3500. The contact stated that while driving approximately 10-15 MPH, there was an abnormal rattling sound coming from the vehicle. The engine warning light was illuminated. The local dealer was contacted, and it was determined that the grid heater bolt had melted and fallen into the engine. The vehicle was repaired after two months due to the piston being on backorder. The manufacturer was contacted, but no additional assistance was provided. The approximate failure mileage was 35,000. The VIN was not available.

Driver of the 2022 Ram 3500 pulled out of a driveway onto a street and ran over a pedestrian who was crossing in front of him. Driver states he did not see the pedestrian. I understand the 2022 Ram 3500 is equipped with front ParkSense Sensors, but these sensors failed to deploy. The pedestrian suffered very serious injuries requiring weeks of hospitalization and additional outpatient rehabilitation. The incident is caught on surveillance camera. The vehicle should be available for inspection upon request. The vehicle has not been inspected.

I have had the seal between the transmission and transfer case replaced 3 times due to leaking since new and after each repair within miles of each repair and all prior to the vehicle reaching 50,000 miles. The last time it was repaired at 65,000 miles they decided to replace the transmission with a new transmission - it also leaked between the transmission and transfer case within 1 day and less than 100 miles.

Every month I am receiving a check engine light for abs / traction control / failure. Dealer states HPU unit is bad, however I noticed all the fuses in the fuse box were loose. I pushed them in to reseat and the error cleared. This happens monthly. This last time happened during a snow storm and disabled abs.

***1*** The emissions system on this truck (2022 Ram 3500 with 34,435 miles) has been problematic since I acquired it 5 months ago. It continually attempts to regenerate and rid itself of ash/soot buildup. If it does not successfully regenerate, it will go into a state of reduced power, also known as limp mode. The truck is available for inspection and will be at Lithia CDJR in Corpus Christi tomorrow, 07 Jan 2026. ***2*** Today specifically, the truck flashed a message EXHAUST FILTER NEARING FULL SAFELY DRIVE AT CONSISTENT SPEED TO CLEAR. I got on the highway to achieve this and avoid lights and stop/go traffic. It typically takes around 25 minutes of consistent driving for it to clear. But today, shortly after I reached highway speeds, the truck entered limp mode, displaying EXHAUST FILTER FULL REDUCED POWER SEE DEALER. This was a very alarming incident that created a bottleneck on the highway and presumably for me to nearly be rear ended as it happened at 5:35pm. I was able to safely make it off of the highway, however this incident has put the lives of all motorists on the road around me today in danger. ***3*** The truck has been inspected numerous times by the dealership. The Diesel Particulate Filter was replaced on 01 October 2025 (this was the first time the truck went into limp mode on me). The frequent regenerations continued after the DPF replacement and a sensor was replaced on 29 October 2025. Regens continue at approximately 1 per week. ***4*** This is a known issue amongst the community of RAM truck owners. It's unfortunate that many do not report it because the safety issue could easily set off a chain reaction, especially if this heavy duty truck were to be towing a heavy load as it capable of doing.

The contact owns a 2022 Ram 3500. The contact stated that while driving at various speeds, the vehicle hesitated to accelerate while the accelerator pedal was depressed. The check engine warning light was illuminated. The vehicle was taken to a local dealer, where it was diagnosed; however, the cause of the failure was not determined. In addition, the contact stated that the vehicle was taken to the same dealer approximately eight times, and a loaner vehicle was provided; however, after several unknown repairs, the failure reoccurred. The vehicle was previously repaired under warranty. The manufacturer was made aware of the failure. The failure mileage was approximately 2,000.

The # 4 cam bearing seized to the camshaft. Upon further investigation the #4 main bearing was damaged from metal chips that were not removed during the manufacture of the engine. This damage from the manufacturing defect left the engine block damaged beyond repair. So a short block was ordered and installed.